SD-Access for CCIE Enterprise Infrastructure

Every SD-Access lesson in the CCIE Enterprise Infrastructure course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

22 lessons · 146 min of video · 22 labs

  1. Manual underlay

    The SD-Access manual underlay for CCIE Enterprise Infrastructure: routed access, /32 RLOC routes, no default route to the WLC, and VXLAN's 50 bytes.

    5 min video · lab: SD-Access, step by step

  2. LAN automation and PnP

    SD-Access LAN automation and PnP for CCIE Enterprise Infrastructure: the seed device, the pool, the temporary configuration, and a factory switch booting.

    7 min video · lab: SD-Access, step by step

  3. Device discovery and management

    Catalyst Center device discovery for CCIE Enterprise Infrastructure: discovery writes to devices, reach and credentials, four discovery methods, and Managed.

    6 min video · lab: SD-Access, step by step

  4. Extended nodes

    SD-Access extended nodes for CCIE Enterprise Infrastructure: switches for noncarpeted spaces, onboarding after a reset, licenses, and platforms.

    11 min video · lab: SD-Access, step by step

  5. LISP and BGP control planes, host onboarding

    SD-Access control plane for CCIE Enterprise Infrastructure: one anycast gateway on every edge, EIDs and RLOCs, the control plane node, onboarding.

    7 min video · lab: SD-Access, step by step

  6. VXLAN data plane

    The SD-Access VXLAN data plane for CCIE Enterprise Infrastructure: what goes on the wire, the untouched frame, the VNI, the group ID, and RLOC to RLOC.

    7 min video · lab: SD-Access, step by step

  7. TrustSec policy plane

    The SD-Access TrustSec policy plane for CCIE Enterprise Infrastructure: where an SGT comes from, how it travels, egress enforcement, and the policy matrix.

    6 min video · lab: SD-Access, step by step

  8. L2 flooding

    SD-Access Layer 2 flooding for CCIE Enterprise Infrastructure: no broadcast flooding by default, silent hosts, flooding per pool, and the underlay RP.

    10 min video · lab: SD-Access, step by step

  9. Native multicast

    SD-Access multicast for CCIE Enterprise Infrastructure: head-end replication in the overlay, native multicast in the underlay, and who makes the copies.

    9 min video · lab: SD-Access, step by step

  10. Single-site campus design

    SD-Access single-site design for CCIE Enterprise Infrastructure: what a fabric site is, its three roles, LISP sessions, and sizing a site.

    7 min video · lab: SD-Access, step by step

  11. Multisite design and transits

    SD-Access multisite and transits for CCIE Enterprise Infrastructure: what a transit is, the SD-Access transit keeping VRF and SGT, and the IP-based transit.

    7 min video · lab: SD-Access, step by step

  12. Fabric in a box

    SD-Access Fabric in a Box for CCIE Enterprise Infrastructure: border, control plane and edge on one switch, what it gives up, and building in resilience.

    7 min video · lab: SD-Access, step by step

  13. Authentication templates

    SD-Access authentication templates for CCIE Enterprise Infrastructure: closed authentication, 802.1X then MAB, and open, low impact and closed compared.

    8 min video · lab: SD-Access, step by step

  14. Port configuration

    SD-Access port configuration for CCIE Enterprise Infrastructure: the site template and per-port assignment, the inherit icon, and legitimate exceptions.

    5 min video · lab: SD-Access, step by step

  15. Multisite remote border

    SD-Access multisite remote border for CCIE Enterprise Infrastructure: one central exit for a VN across sites, per VN not per site, and one subnet everywhere.

    7 min video · lab: SD-Access, step by step

  16. Border priority

    SD-Access border priority for CCIE Enterprise Infrastructure: load balancing by default, priority 1 to 10 where 1 is highest, and a default of 10.

    4 min video · lab: SD-Access, step by step

  17. Adding devices to fabric

    Adding devices to SD-Access for CCIE Enterprise Infrastructure: what has to be true first, why success is not proof, and show lisp session.

    5 min video · lab: SD-Access, step by step

  18. Transit handoffs

    SD-Access transit handoffs for CCIE Enterprise Infrastructure: the border's options, carrying VRF and SGT, the SD-Access transit, and SD-WAN.

    6 min video · lab: SD-Access, step by step

  19. Peer device and the fusion router

    The SD-Access fusion router for CCIE Enterprise Infrastructure: shared services outside every VN, a router outside the fabric, per-VRF BGP, and leaking.

    5 min video · lab: SD-Access, step by step

  20. Layer 2 border handoff

    SD-Access Layer 2 border handoff for CCIE Enterprise Infrastructure: one subnet in and out of the fabric, routed segments and Layer 2 VNs, and the gateway.

    7 min video · lab: SD-Access, step by step

  21. Macro segmentation

    SD-Access macro segmentation for CCIE Enterprise Infrastructure: virtual networks as VRFs, complete Layer 3 isolation, and the exception you build.

    6 min video · lab: SD-Access, step by step

  22. Micro segmentation

    SD-Access micro segmentation for CCIE Enterprise Infrastructure: groups and contracts inside a VN, Catalyst Center as the policy owner, and save then deploy.

    4 min video · lab: SD-Access, step by step