Lab C2: Campus, broken
The campus you hardened, a month later. Since then the cameras got a viewing station on D2 and the office ports got port security. Last night five things were changed, and this morning there are only two tickets, because faults that share a victim share a ticket. Each ticket has more than one cause, standing one behind another: repair the first and the symptom does not move. The design has not changed: it is on the diagram, and each repair is the one that puts the campus back to it.
What you will do
- Ticket 1: PC2 is dead
- Ticket 1, continued: the port is up and PC2 is still alone
- Ticket 2: the cameras cannot be watched
- Ticket 2, continued: carried, and still not delivered
- Ticket 2, the last reason: D2 is on its own
- Save it
New in this lab: the same, found from symptoms.
How it is checked
Each of the 6 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 6 pass.
The lessons it follows
It opens after these, and uses what they teach:
- Switch administration
- CDP and LLDP
- UDLD
- Access ports, trunk ports, native VLAN and manual VLAN pruning
- Normal and extended range VLANs
- Voice VLAN
- EtherChannel modes and types
- Load balancing
- EtherChannel misconfiguration guard
- Multichassis EtherChannel use cases
- PVST+, Rapid PVST+, MST
- Switch priority, port priority, path cost, timers
- PortFast, BPDU guard, BPDU filter
- Loop guard, root guard
Open the lab benchIt needs a computer: phones and tablets are not supported.
