Lab C1: Campus, hardened
From here the labs read the way the exam does. You are given a network that works and a list of things somebody wants from it, in their words. No task names a feature, and most have one right feature and two that look right. This one is a small campus: a pair of distribution switches, two access switches, two office PCs and a camera recorder. The VLANs, the trunks and the access ports are in place and the PCs reach each other. Seven requirements turn it from a campus that works into one that is meant.
What you will do
- Who is in charge
- A VLAN for the cameras, and only where there are cameras
- Two cables, one link, both used
- The other uplink, and a faster heartbeat
- The edge, and what happens when somebody plugs in a switch
- Three one-line settings
- Save it
New in this lab: MAC table, errdisable, MTU, UDLD, pruning, extended VLANs, load balancing, STP tuning.
How it is checked
Each of the 7 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 7 pass.
The lessons it follows
It opens after these, and uses what they teach:
- Switch administration
- CDP and LLDP
- UDLD
- Access ports, trunk ports, native VLAN and manual VLAN pruning
- Normal and extended range VLANs
- Voice VLAN
- EtherChannel modes and types
- Load balancing
- EtherChannel misconfiguration guard
- Multichassis EtherChannel use cases
- PVST+, Rapid PVST+, MST
- Switch priority, port priority, path cost, timers
- PortFast, BPDU guard, BPDU filter
- Loop guard, root guard
Open the lab benchIt needs a computer: phones and tablets are not supported.
