Lab C9: Multicast
A studio that sends, a floor that listens, and two routers between them that are to be where senders and listeners find each other. Every router already reaches every other, for IPv4 and IPv6, and none of them knows what multicast is. The two hosts on the floor are already asking for their groups and nobody is listening to them. Seven requirements build the service a piece at a time. Nothing in this lab sends a stream: you read your work in the trees the hosts' requests build, in who each router believes the meeting point is, and in which way each router would accept a stream from.
What you will do
- Routers that listen
- A meeting point nobody has to be told
- One address, two routers
- A range with no meeting point
- The switch on the floor
- Both ways to the studio
- The same for IPv6, for receivers that never ask
- Save it
New in this lab: IGMP, snooping, PIM, RP, SSM, MSDP, MLD.
How it is checked
Each of the 8 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 8 pass.
The lessons it follows
It opens after these, and uses what they teach:
- IGMP and the querier
- IGMP snooping, PIM snooping and IGMP filtering
- MLD and MLD snooping
- Reverse path forwarding check
- PIM sparse mode
- Static RP, Auto-RP and BSR
- Group-to-RP mapping
- Source Specific Multicast
- Multicast boundary and RP announcement filter
- PIMv6 anycast RP
- IPv4 anycast RP using MSDP
- Multicast multipath
Open the lab benchIt needs a computer: phones and tablets are not supported.
