Lab C13: Security
One office, working. A router, an access switch, the administrator's PC, a test host on your desk, a server, and a small box under a desk that nobody admits to plugging in. The security review has left seven requirements, each written as what must be true and none as a command. The router and the switch are yours. The test host H1 is yours to look from: it is a router standing in for a PC, nothing on it needs changing and nothing on it is graded. The server, the provider and the box are not yours. Each requirement has a quick way to appear to meet it that breaks something else; what still has to work is part of every requirement.
What you will do
- Only the gateway may announce itself
- A port sends only from the address it was given
- No Telnet to the server, even from next door
- A broadcast storm takes down one port, for ten minutes
- Nothing from outside claims to be from inside
- The router protects its own processor
- Logins ask a server that is not there yet
- All seven at once, and saved
New in this lab: CoPP, AAA, VACL, storm control, IP Source Guard, uRPF, RA Guard.
How it is checked
Each of the 8 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 8 pass.
The lessons it follows
It opens after these, and uses what they teach:
- Control plane policing and protection
- AAA
- VLAN maps and port ACLs
- Storm control
- DHCP snooping and option 82
- IP Source Guard
- Dynamic ARP Inspection
- Port security
- IPv6 traffic filters
- IPv4 access control lists
- Unicast Reverse Path Forwarding
- IPv6 RA Guard and DHCP Guard
- The IPv6 binding table and SISF device tracking
- IPv6 ND inspection and snooping
- IPv6 Source Guard
Open the lab benchIt needs a computer: phones and tablets are not supported.
