Multicast for CCIE Enterprise Infrastructure

Every Multicast lesson in the CCIE Enterprise Infrastructure course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

12 lessons · 68 min of video · 12 labs

  1. IGMP and the querier

    IGMP for CCIE Enterprise Infrastructure: hosts and routers on one LAN, the querier election, joining and leaving a group, and when the querier goes.

    4 min video · lab: Multicast

  2. IGMP snooping, PIM snooping and IGMP filtering

    IGMP snooping, PIM snooping and IGMP filtering for CCIE Enterprise Infrastructure: switches watching reports, a VLAN with no router, and routers at an IXP.

    7 min video · lab: Multicast

  3. MLD and MLD snooping

    MLD and MLD snooping for CCIE Enterprise Infrastructure: MLDv1 and v2 against IGMP, MLD inside ICMPv6, enabling snooping globally, and flooding.

    6 min video · lab: Multicast

  4. Reverse path forwarding check

    Multicast RPF for CCIE Enterprise Infrastructure: why a group has no location, the lookup on the source, borrowing the unicast table, and RPF failures.

    5 min video · lab: Multicast

  5. PIM sparse mode

    PIM sparse mode for CCIE Enterprise Infrastructure: enabling multicast routing, the RP both ends know, the pull model, the DR, registers, and the shared tree.

    6 min video · lab: Multicast

  6. Static RP, Auto-RP and BSR

    Static RP, Auto-RP and BSR for CCIE Enterprise Infrastructure: typing the RP everywhere, candidate RPs and mapping agents, and the 224.0.1.39 problem.

    4 min video · lab: Multicast

  7. Group-to-RP mapping

    Group-to-RP mapping for CCIE Enterprise Infrastructure: which RP is eligible for a group, why learned mappings beat static ones, override, and the BSR hash.

    6 min video · lab: Multicast

  8. Source Specific Multicast

    Source Specific Multicast for CCIE Enterprise Infrastructure: (S,G) channels, the SSM range, no RP or shared tree, IGMPv3 reports, and SSM mapping.

    6 min video · lab: Multicast

  9. Multicast boundary and RP announcement filter

    Multicast boundaries and RP announcement filters for CCIE Enterprise Infrastructure: accepting every RP claim by default, rp-announce-filter, and boundaries.

    7 min video · lab: Multicast

  10. PIMv6 anycast RP

    PIMv6 anycast RP for CCIE Enterprise Infrastructure: one RP address on several routers, why the naive version fails, and sharing sources in PIM.

    6 min video · lab: Multicast

  11. IPv4 anycast RP using MSDP

    IPv4 anycast RP with MSDP for CCIE Enterprise Infrastructure: what MSDP was for, Source-Active messages, two addresses per member, and the SA RPF check.

    5 min video · lab: Multicast

  12. Multicast multipath

    Multicast multipath for CCIE Enterprise Infrastructure: one RPF path by default, splitting is not balancing, the S-G hash, and polarized links.

    6 min video · lab: Multicast