Networking Basics for CCNA 200-301

Every Networking Basics lesson in the CCNA 200-301 course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

8 lessons · 62 min of video · 2 labs

  1. What Is Networking

    What is networking? A network seen two ways, by its users and by the engineers who run it, then home Internet connections and enterprise networks.

    7 min video

  2. Introduction to TCP/IP Networking

    Introduction to TCP/IP for CCNA: what protocols and standards are, why networks use a networking model, and how TCP/IP won over vendor models and OSI.

    9 min video

  3. TCP/IP and OSI Networking Models

    The TCP/IP and OSI models for CCNA: what the application and transport layers do, how layers work together, and how OSI's layer numbers map to TCP/IP.

    8 min video

  4. Data Encapsulation and TCP/IP Message Names

    Data encapsulation for CCNA: how each layer wraps a header around the data in five steps, and what segment, packet and frame mean exactly.

    6 min video

  5. TCP and UDP

    TCP vs UDP for CCNA: what TCP's services add, how port numbers pick the application, the TCP and UDP headers, and TCP's three-way handshake.

    10 min video

  6. IPv4 Fundamentals and the IPv4 Header

    IPv4 fundamentals for CCNA: what IP does, IPv4 addresses and routers, the default gateway, and how a packet is routed hop by hop across a network.

    9 min video · lab: Addresses

  7. Address Resolution Protocol (ARP)

    ARP explained for CCNA: why a frame's destination MAC address is the one blank, how the ARP Request and Reply fill it, and who ARP asks about.

    6 min video

  8. ICMP, Ping, DNS and Common TCP/IP Applications

    DNS, URIs and ping for CCNA: how a name becomes an IP address, what a browser sends to load a page, recursive DNS, and testing a path with ping.

    7 min video · lab: Addresses