Ethernet for CCNA 200-301
Every Ethernet lesson in the CCNA 200-301 course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.
Fundamentals of Ethernet LANs
Ethernet LAN basics for CCNA: LANs and WANs, the switch, router and access point in a home or office, and the IEEE 802.3 family of Ethernet standards.
7 min video
Ethernet Physical Media and Cabling
Ethernet cabling for CCNA: twisted pairs, RJ-45 pins, straight-through and crossover cables, 10BASE-T, 100BASE-T and 1000BASE-T, and fiber.
8 min video
Ethernet Frames and MAC Addressing
Ethernet frames and MAC addresses for CCNA: the frame field by field, 48-bit MAC addresses and the OUI, and unicast, broadcast and multicast.
8 min video
Ethernet Switching Logic
How a switch forwards Ethernet frames for CCNA: full duplex on switches, why old hubs need half duplex, collisions, and how CSMA/CD takes turns.
7 min video · lab: Watch a switch learn
MAC Address Learning, Forwarding, Flooding and Filtering
How a switch learns MAC addresses for CCNA: learning from the source, forwarding and filtering on the destination, flooding unknown unicasts and broadcasts.
15 min video · lab: Watch a switch learn
Cisco IOS CLI and EXEC / Configuration Modes
The Cisco IOS CLI for CCNA: reaching a switch by console, Telnet or SSH, the console cable, and user EXEC, privileged EXEC and configuration mode.
12 min video · lab: First contact
Basic Switch Management and Configuration Files
Basic switch configuration for CCNA: running-config and startup-config, saving with copy, where each copy lives, and giving a switch an IP address on an SVI.
18 min video · lab: First contact
Switch Interfaces, Autonegotiation and Troubleshooting
Switch interfaces for CCNA: connected, notconnect and disabled, reading show interfaces, speed and duplex autonegotiation, and a duplex mismatch.
18 min video · lab: Bad link
