Lab C6: OSPF v2/v3
Four routers with addresses and no routing at all: three in a triangle that is the backbone, and a small site behind one of them. You build OSPF for IPv4 and for IPv6, and then make it behave the way a network that has grown up behaves: the small site told as little as possible, costs that mean something, a backbone that ignores strangers and does not panic at every flap, routing tables without the plumbing in them, and a router taken out of the path for a night without being turned off. Every requirement says what must be true afterwards; none says how.
What you will do
- Areas and neighbors, IPv4
- A small site told as little as possible
- IPv6, in the form that has families
- Costs that mean something
- A backbone that keeps its head
- Out of the path for a night
- Save it
New in this lab: address families, area types, path preference, throttling, GTSM, prefix suppression.
How it is checked
Each of the 7 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 7 pass.
The lessons it follows
It opens after these, and uses what they teach:
Open the lab benchIt needs a computer: phones and tablets are not supported.
