IP Routing for CCNA 200-301

Every IP Routing lesson in the CCNA 200-301 course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

7 lessons · 93 min of video · 5 labs

  1. Operating Cisco Routers and Basic Router Configuration

    Basic Cisco router configuration for CCNA: enterprise and SOHO routers, installing one, the CLI, interface names, IP addresses and no shutdown.

    19 min video

  2. Routing Table Components and Route Sources

    The routing table for CCNA: connected and local routes, configured versus installed, reading a route line, administrative distance and the metric.

    14 min video · lab: Read the table

  3. IP Routing and Forwarding Decisions

    How a router forwards a packet for CCNA: host logic, the router's five steps, a new frame at every hop, the ARP table, and longest prefix match.

    13 min video · lab: Read the table

  4. IPv4 Static, Default, Host and Floating Static Routes

    Static routes for CCNA: ip route, default routes, the return path, host routes, and floating static routes with a higher administrative distance.

    13 min video · lab: Static routes

  5. IP Routing in the LAN: Router on a Stick and SVIs

    Inter-VLAN routing for CCNA: why VLANs need a router, router on a stick with 802.1Q subinterfaces, checking it, and why a fault can stay quiet.

    13 min video · lab: Between VLANs

  6. Layer 3 Switch, Routed Ports and Layer 3 EtherChannel

    Layer 3 switching for CCNA: routed ports with no switchport, where routed ports and SVIs fit, and bundling routed links into a Layer 3 EtherChannel.

    10 min video · lab: Between VLANs

  7. Troubleshooting IPv4 Routing with Ping and Traceroute

    Troubleshooting IPv4 routing for CCNA: ping from the router, reading ! and . results, extended ping to test the way back, and pings to neighbours.

    11 min video