Lab R4: OSPF, broken

The OSPF network you built in the last lab, with one addition: a second circuit between R1 and R5, more expensive to use, costed at 50 at both ends so that it carries traffic only when the first circuit is down. It all ran for a day. After last night's maintenance, three sites are complaining. The design is as lab R3 left it and is not to be changed: the areas and their types, the point-to-point links, the virtual link, the authentication between R1 and R2, the two partner networks. Find what was typed that does not belong, and take out only that.

In Daveth Pro (Network)Find the fault and fix it · Six routers · 6 tasks

What you will do

  1. Count what is left
  2. Two routers, two ideas of one area
  3. Working, and on the wrong circuit
  4. Two routers that count time differently
  5. Full neighbors, and no routes
  6. As designed

New in this lab: neighbors, path preference.

How it is checked

Each of the 6 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 6 pass.

The lessons it follows

It opens after these, and uses what they teach:

Open the lab benchIt needs a computer: phones and tablets are not supported.