OSPF for CCNA 200-301

Every OSPF lesson in the CCNA 200-301 course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

6 lessons · 69 min of video · 3 labs

  1. Understanding OSPF Concepts

    OSPF concepts for CCNA: why routing protocols beat typed routes, IGPs and EGPs, distance vector and link-state families, and hop count versus OSPF cost.

    12 min video

  2. OSPF Neighbors, LSDB, LSAs and SPF

    How OSPF neighbours form for CCNA: Hellos and router IDs, init, 2-way and full, swapping the LSDB, Hello and Dead Intervals, and DRs on Ethernet.

    14 min video

  3. Implementing Single-Area OSPFv2

    Configuring single-area OSPFv2 for CCNA: router ospf, network commands and wildcard masks, the router ID, and the show command that proves each step.

    13 min video · lab: OSPF

  4. OSPF Router ID, Passive Interfaces, Default Routes and Cost

    OSPF settings for CCNA: how the router ID is chosen, passive interfaces, advertising a default route with default-information originate, and cost.

    11 min video · lab: OSPF

  5. OSPF Network Types and DR/BDR Election

    OSPF network types for CCNA: point-to-point and broadcast, what the DR and BDR do, how they are elected, and why a better router does not preempt.

    9 min video · lab: OSPF

  6. Troubleshooting OSPF Neighbors and Route Selection

    Troubleshooting OSPF neighbours for CCNA: the neighbour requirements, the best show command for each, and mismatched timers, areas, router IDs and MTU.

    10 min video