Lab E3: RSTP and MST
Two distribution switches and two access switches, and every access switch has a cable to each distribution switch. Half of those cables do nothing: with one tree, spanning tree blocks the same uplink for every VLAN. You will build it that way first, read the waste, and then give the campus two trees, so that each uplink earns its place. Then you make sure no access switch can ever take either tree over.
What you will do
- The campus, switched
- One fast tree for each VLAN
- Two trees for four VLANs
- Both uplinks at work
- Guard the edges
- Try to take the root
- Stop claiming
- Save all four
New in this lab: MST, root guard, BPDU guard.
How it is checked
Each of the 8 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 8 pass.
The lessons it follows
It opens after these, and uses what they teach:
Open the lab benchIt needs a computer: phones and tablets are not supported.
