Spanning Tree for CCNA 200-301

Every Spanning Tree lesson in the CCNA 200-301 course, in the order you study them. Each page opens about the first half of its lesson to read, some the whole of it; the full lessons, their videos and labs are in the plan.

5 lessons · 59 min of video · 3 labs

  1. Spanning Tree Protocol: Why It Exists and What It Does

    What spanning tree is for, for CCNA: why a loop of switches floods frames forever, and how STP blocks a port to stop it while keeping a spare path.

    9 min video

  2. STP Root Bridge and Port Role Selection

    STP root bridge election for CCNA: the bridge ID and its priority, why the lowest bridge ID wins, and how each switch picks its root port.

    12 min video · lab: Spanning tree

  3. STP Cost, Port States and Timers

    STP cost, port states and timers for CCNA: default port costs by speed, Hello, MaxAge and forward delay, and why convergence takes about half a minute.

    13 min video

  4. Rapid PVST+ and RSTP

    RSTP and Rapid PVST+ for CCNA: alternate and backup ports, the discarding state, edge and point-to-point ports, and one spanning tree per VLAN.

    15 min video · lab: Spanning tree

  5. PortFast and STP Protection Features

    PortFast and BPDU Guard for CCNA: skipping listening and learning on a port with one host, and shutting a port that hears a BPDU it should not.

    10 min video · lab: Spanning tree