Lab E5: EIGRP beside OSPF
Four routers in a diamond, and somebody has run two routing protocols on the very same links: OSPF, which you know, and EIGRP. Each has found its own way to the three networks behind R4. Reading them side by side on one router is the quickest way to see what a link-state protocol and an advanced distance-vector protocol each know, how each one measures a path, and what each does when a path dies.
What you will do
- Two protocols, one table
- Both offered it. One is in the table
- What OSPF adds up
- What EIGRP works from
- A second path, already checked
- Share the load unevenly
- OSPF, meanwhile
- Cut the fast path
- Give it back
New in this lab: metric, load balancing.
How it is checked
Each of the 9 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 9 pass.
The lessons it follows
It opens after these, and uses what they teach:
- How a router chooses: prefix length, AD, metric, ECMP, and the four algorithm families
- OSPF neighbors: hellos, router ID, DR/BDR and the adjacency checklist
- OSPF areas and LSAs: what each router knows, and how it picks a path
- OSPF area types: stub, totally stubby, NSSA
- EIGRP, seen from OSPF: DUAL, feasible successors, metrics and unequal-cost load balancing
Open the lab benchIt needs a computer: phones and tablets are not supported.
