Lab C4: Between domains

Routing inside one domain is the easy part. This lab is every seam: between three tables on one router, between OSPF and EIGRP, between your network and a provider, and along the one link that carries the lot. R1 holds the tables STAFF, LAB and GUEST beside its own. R2 is the border between OSPF, EIGRP and the provider. Six requirements, each saying what the other side must receive and, just as firmly, what it must not. Addresses, the tables, OSPF 1, EIGRP 100 and R2's BGP neighbor are in place; the provider's session is down, and one of the tasks is why.

In Daveth Pro (Network)Build it from the brief · Four routers · 7 tasks

What you will do

  1. One network across, and all of them back
  2. A hop of their own
  3. Prove who you are
  4. What each side is to receive
  5. Two filters on the receiving end
  6. The link everything rides on
  7. Save it

New in this lab: leaking, VASI, filtering, redistribution, authentication, BFD, MTU.

How it is checked

Each of the 7 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 7 pass.

The lessons it follows

It opens after these, and uses what they teach:

Open the lab benchIt needs a computer: phones and tablets are not supported.