Lab N13: Read the table

A router does one thing with a packet: it looks the destination up in its routing table and sends the packet where the best line says. This network is already built and working. You'll build nothing. You'll read R1's table until you can say where any packet will go before R1 does it.

In Daveth Pro (Network)Watch it work, then explain it · Five routers · 10 tasks

What you will do

  1. Where each line came from
  2. When nothing else matches
  3. Two numbers in brackets
  4. Further by OSPF's measure
  5. Two lines match
  6. One fewer
  7. None at all
  8. A route that is not in the table
  9. Take OSPF's route away
  10. Give it back

New in this lab: prefix, distance, metric, longest match.

How it is checked

Each of the 10 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 10 pass.

The lessons it follows

It opens after these, and uses what they teach:

Open the lab benchIt needs a computer: phones and tablets are not supported.