Lab C3: Routing basics, deep
One router, five requirements, and every one of them is about which route wins and why. R1 reaches the far site two ways, through R2 by OSPF and through R3 by EIGRP; R5 stands beside it; a guest network hangs off one port and a partner's router off another that nobody has configured. Each task has an obvious answer that works and is wrong, usually because it moves more than was asked. Read what must not change as carefully as what must. Everything is done on R1; the other routers are finished and are there to be looked at.
What you will do
- One network, the other way
- A last resort that knows its place
- Multicast from the way R1 no longer looks
- Two policies
- The partner, in a table of its own
- Save it
New in this lab: distance, PBR, VRF-Lite, VRF-aware routing.
How it is checked
Each of the 6 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 6 pass.
The lessons it follows
It opens after these, and uses what they teach:
Open the lab benchIt needs a computer: phones and tablets are not supported.
