Lab E1: Trunks that won't form

Somebody built this before you: three switches in a triangle, a sales VLAN and an engineering VLAN, and a ticket that says engineering on SW1 cannot reach engineering on SW3. Every cable is in and every port is up. Each of the three links between the switches is wrong in a different way, and one of the three will not show itself until the other two are mended.

In Daveth Pro (Network)Find the fault and fix it · Three switches and four PCs · 10 tasks

What you will do

  1. The ticket
  2. Which links are trunks at all
  3. What was asked for, and what happened
  4. Two ends that both wait
  5. One end says trunk
  6. Make both ends agree
  7. The ticket is closed. The network is not mended
  8. Every trunk carries both
  9. Prove the third link
  10. Put it back, and keep it

New in this lab: DTP, static, dynamic.

How it is checked

Each of the 10 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 10 pass.

The lessons it follows

It opens after these, and uses what they teach:

Open the lab benchIt needs a computer: phones and tablets are not supported.