Lab N5: Bad link

Two switches joined by one cable, a PC on each. A colleague set them up and went home, and PC1 can't reach PC2. Nothing you've learned is missing here: the addresses are right and the cables are in. Find out what's wrong with the link, fix it, and don't stop at the first thing you find.

In Daveth Pro (Network)Find the fault and fix it · Two switches and two PCs · 10 tasks

What you will do

  1. See it fail
  2. One line for each port
  3. The other end
  4. Bring the link up
  5. Up is not the same as healthy
  6. What the switch already told you
  7. Where the damage shows
  8. Make the ends agree
  9. Prove it
  10. Save what you changed

New in this lab: speed, duplex, errors.

How it is checked

Each of the 10 tasks is checked on the devices themselves as you finish it: the bench reads how the network is configured and what it does, not what you typed. The lab is done when all 10 pass.

The lessons it follows

It opens after these, and uses what they teach:

Open the lab benchIt needs a computer: phones and tablets are not supported.